Zipp’s new carbon Vuka Extensions give you all the options needed to optimize your aero position and go for the win or your personal best.
Ski-Tip places you in a position for speed as well as long-haul comfort. 140 grams.
All carbon Vuka Extensions come with an industry-standard 22.2 mm diameter and are compatible with the new Vuka Alumina Clip but not the VukaClip or VukaAero. All extension styles have a length of 360 mm and have sleek internal cable routing. The carbon Race, Straight and Ski-Tip bends are compatible with all shifting systems.
Guidelines for cutting extensions:
The extensions are marked on the underside in 1 cm increments with half centimeter increments shown with smaller lines. A minimum of 3 cm of extension must be inserted into the VukaBullet body to avoid damaging the extensions. This means that a minimum of six marks (three large and three small) must be inserted into the bar after the bars are cut to length. If more than 4 cm of extension need to be removed, we recommend removing in 2-3 cm increments to avoid overcutting of the extensions. The extension should be wrapped in masking tape at the point where it will be cut and cut with a composite or FRP specific hacksaw blade. The masking tape will help ensure that the cut is clean and no jagged fibers lift off of the part.
Warning: Do NOT cut anything from the front end of these extensions.
You may also be interested in the following product(s)